Standard operations
Maintenance work:
Brief diagnostic test
Verify Check Control messages.
Check indicator and warning lights.
Reset CBS display.
Inspect tires, adjust tire pressures and reset Tire Pressure Monitor.

Engine oil
Maintenance work:
Change the engine oil and oil filter.
After every 3rd engine oil change: Intake air cleaner: replace air filter element (reduce replacement interval in dusty operating conditions).
Parking brake: Check function and pre-burnish.

Microfilter (not shown in CBS)
Maintenance work:
Replace ventilation microfilter.

Front brake
Maintenance work:
Replace brake pads, clean brake pad contact points in calipers.
Brake discs: Check surface and thickness, if necessary replace at extra charge.

Rear brake
Maintenance work:
Replace brake pads, clean brake pad contact points in calipers.
Brake discs: Check surface and thickness, if necessary replace at extra charge.
Parking brake: Check condition, brake lining thickness and function, if necessary replace
at extra charge.

Vehicle Check
Maintenance work:
Check operation of horn, headlight flasher and hazard warning flashers.
Check instrument and control lighting and heater/air-conditioning blower.
Check lighting system: turn signals, back-up, license plate, interior (incl. map, reading
lights), glovebox, flashlight, luggage area lights.
Safety belts: Check condition and function.
Check windshield wiper and washer jet positions.
Body: Check for corrosion (except cavities).
Tires: Check tread depth, wear pattern, outer condition, inflation pressure. If necessary, correct pressure.
Reset Tire Pressure Monitor.
Battery: Check state of charge (magic eye) and charge if required.
Power steering reservoir: Check fluid level.
Visually inspect all SRS airbag units for torn covers, obvious damage or attachment of
stickers.
Rear-view mirrors
Coolant: Check fluid level and concentration.
Windshield washer and intensive cleaning system: Check protection level, fluid level, top
if necessary.
Brake system connections and lines: Check for leaks, damage and correct positioning.
Underbody, incl. all visible parts (i.e. transmission, rear axle, fuel lines, exhaust system):
Check for damage, leaks and corrosion.
Steering components: Check for clearance, leaks, damage and wear.
Final Inspection: Road test with check of:
– Brakes, including burnishing of parking brake pads
– Steering
– Shock absorbers (visual)
– Transmission

Brake fluid
Maintenance work:
Replace brake fluid.

Automatic Transmission
Maintenance work:
Replace ATF at intervals of 100,000 miles..